Hi Every one,
I am having a problem with the front discs on my 68 chevelle, I am getting no fluid/pressure to the left front caliper I did change out the caliper with no change, and am not sure what could be causing this. I suspect the distribution block to be stuck but is this possible? and if so how can I be sure? BTW I have all new S.S lines installed on the car and
I am running a 69 steup on this car with single piston calipers and the metering valve near the Master and separte dist. block on the frame. the brakes have always worked great until now.
Thanks for any help,
Joe

Originally posted by Joe M:
the brakes have always worked great until now.
Thanks for any help,
Joe Joe, did anything else change? Have you tried disconnecting the line and pumping to check for fluid?

I would try working my way up the system from the caliper in question until I found the blockage.

Good Luck!!!