I'm looking at the PST front end super kit, I believe that it contains everything that I need.


2 upper ball joints
2 lower ball joints
2 outer tie rod ends
4 upper inner control arm bushings
4 lower inner control arm bushings
2 strut rod bushings (optional)
2 stabilizer links
2 sway bar bushings
2 control arm bumpers
2 inner tie rods
2 tie rod adjusting sleeves
1 idler arm
2 upper inner shafts


It's been a while since I did this, Is that everthing that I would need? With the inner tie rods and new sleeves, that's all I'd need to rebuild the center link, correct? or would it be better to buy a new center link? I appreciate any help on this subject, thanks Dave.

Fairly complete kit, buy a new centerlink. It is a wear out item and probably needs replacing, they are only about 100 bucks. Good money spent, it will keep everything tracking true.

deenis68, thank you for your response. Does a centerlink come with some of the parts on it, or can I get one bare and use the kit? Don't see one listed at PST. Thanks for the answers.


Nevermind, I found it. Thanks for the help.

Kragen or Pep Boys have the center link too for about $50.