jglenn6
Mar 1st, 10, 7:43 PM
When converting from a stock th350 to a 700r4 transmission, what needs to be done with the dash? It's a stock non SS dash.
|
FiredUp396 Mar 1st, 10, 8:48 PM not sure what you mean by dash.It depends what type of carb you have if you have a Holley you need a special bracket for the t.v cable then you need to get a lock up for your overdrive.I got a one from from TCI but you could get from www.bowtieoverdrives.com.biggest thing about a 700 r4 is to get the t.v set properly or your new tranny will be fried. FiredUp396 Mar 1st, 10, 8:48 PM www.bowtieoverdrives.com jglenn6 Mar 1st, 10, 9:02 PM I just noticed my mistake, I meant to say the column not the dash. Sorry about the confusion. FiredUp396 Mar 1st, 10, 10:11 PM I can give you another guys website www.jakesperformance.com He will answer anything and is very good about it.You could also google or do a search here.All I know is with my 69 I have a floor consule and the linkage bolts right up to it Robinls5 Mar 2nd, 10, 9:05 PM I have a 700-R in my 71. Mine had a 350-T. Just take the parts from your 350 and bolt them to the 700 and you are done, It is that simple. Just take the " U " piece from the 350 and bolt it to the 400 and your stock colum shifter will work fine . No modification NEEDED. I did adjust the " String " to center it on the colum shifter. The 4 clicks are in the tranny not the column. You will be just fine... Any questions just call 724-527-3088. Did mine in 2003, Have yet to touch anything... Bob ACES--AACA | ||