|
onick Feb 26th, 10, 3:11 PM Looking for some hose separators for my heater core hoses. Haqve a 5/8" and a 3/4" hose. Closest clamp I can find has holes of .625" and .781". See below. What is everone else using? Thanks Eric http://www.summitracing.com/parts/BSP-68325/ http://static.summitracing.com/global/images/prod/large/bsp-68325_w.jpg Big White Feb 26th, 10, 4:48 PM Looking for some hose separators for my heater core hoses. Haqve a 5/8" and a 3/4" hose. Closest clamp I can find has holes of .625" and .781". See below. What is everone else using? Thanks Eric http://www.summitracing.com/parts/BSP-68325/ http://static.summitracing.com/global/images/prod/large/bsp-68325_w.jpg Well, it sounds like you've found exactly what you are looking for. .625" is 5/8" and .781" is a measly 1/32" larger than 3/4". You can't get much closer than that. onick Feb 26th, 10, 5:44 PM Yea, I knew the 5/8 was spot on but wasn't sure how much the 1/32 mattered. Thanks! onick Mar 8th, 10, 7:03 PM :mad:Well looks like I got the wrong ones..I forgot the a 5/8" hose is 5/8 ID....not OD, so the holes in the separators are too small Elcoman Mar 8th, 10, 7:05 PM I just saw this post, I guess I am too late to tell you that those are ID measurements for the hoses.:( FiredUp396 Mar 9th, 10, 10:08 AM those are nice I just got the clips from the resto shop and they ended up to small for one clamp by the alternator.Must be nice to have a summits we don't have those any where close in Canada.And shipping and borders fees make it not fesible | ||