Still trying to guess what distribution valvel to use with my 71 power disc. brake's on front.Did a search here,still not shure.

A friend of mine says a 70-72 Monte will work just plug one line.And kinda want it stock looking without chopping all the lines and adding new.

Or do I need to get after maket valvel,adjustable and redo. the brakelines?

Ground-Up has a repro that works fine in my 71.. No line cutting either.
http://www.ss396.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=396&Product_Code=FM-1350

I think you can still get one for a '71 with disc/drum from GM. I'd at least try them and see. The one you are looking for is a solid brass block one. I think the castiron ones had to have a proportioning valve inline to the fronts to delay them some to allow the rears to catch up. I know the later brass ones are actually called a "combo valve" and don't require any other valves in the system. :eek:

Originally posted by harleighguy:
I think you can still get one for a '71 with disc/drum from GM. I'd at least try them and see. The one you are looking for is a solid brass block one. I think the castiron ones had to have a proportioning valve inline to the fronts to delay them some to allow the rears to catch up. I know the later brass ones are actually called a "combo valve" and don't require any other valves in the system. :eek: I will go with that one.Just don't wanta do it again a pita to get at.I will let ya all know the results.

Thanks :D