pat_wood70velle
Feb 17th, 10, 4:45 PM
I have horrible wheel hop so i was wondering the best solution ive been reading forums on here about the umi relocation brackets and the eddy no hops but not sure which would be the most effective i currently have jegster tubular lower control arms and stock uppers with good bushings stock springs and monroe sensatrac shocks
engine is 505ci about 600+hp muncie m21 trans with 12bolt posi 3.55
LOWBUCKS
Feb 17th, 10, 6:56 PM
I have horrible wheel hop so i was wondering the best solution ive been reading forums on here about the umi relocation brackets and the eddy no hops but not sure which would be the most effective i currently have jegster tubular lower control arms and stock uppers with good bushings stock springs and monroe sensatrac shocks
engine is 505ci about 600+hp muncie m21 trans with 12bolt posi 3.55
how high is the rear end jacked up? that will cause it every time
hmardown
Feb 17th, 10, 7:45 PM
I also had terrible wheel hop and went with the umi relocation brackets & their boxed arms. then i went out put my foot on the brake dropped an anvil on my gas pedal and smoked them tires till the smile on my face was gone. what a difference ! I will also say that i went from 2.73 posi to a 3.42 posi.(i'm sure that helped) and don't forget the sway bar. I noticed it got a little loose when the tranny shifted.
70ss3964sdredonred
Feb 17th, 10, 7:46 PM
I have lakewood traction bars and air bags. Absolutely no wheel hop now. Watch the video...
pat_wood70velle
Feb 17th, 10, 8:52 PM
its not jacked up at all it has stock springs i was just worried about the relocation brackets being an eyesore
BowtieAaron
Feb 17th, 10, 10:45 PM
i slammed the car 3" and got rid of my wheel hop.
i tried just about everything but no hop bars.
aaron
UMI Sales
Feb 18th, 10, 9:19 AM
I also had terrible wheel hop and went with the umi relocation brackets & their boxed arms. then i went out put my foot on the brake dropped an anvil on my gas pedal and smoked them tires till the smile on my face was gone. what a difference !
Great to hear that you are satisfied with the performance of our products. Like mentioned above! Our lift bar is the #1 product that will help eliminate wheel hop and increase your traction performance. The holes are offset in the control arm to allow you to maintain the OEM sway bar. And still maintain great ground clearance. Below is a link to show you what I am talking about.
http://www.umiperformance.com/catalog/index.php?main_page=index&cPath=1_18_23
And we are offering a 15% off sale until the 21st. So if you have any other questions feel free to ask.
Thanks
Brad :D