Hi I have a 68 chevelle that had drum brakes i bought a disc brake setup with brake booster and master cylinder from a 74 olds omega i have finished doing the spindle conversion everything fit i just had to use my steering arms the brake booster bolted up to the fire wall but seems to be at a quite a angle also the rod from the booster does go to the bottom hole of the brake pedal but it seems like it pulled the pedal pretty close to the floor does any body no if this conversion will work is the booster from a a-body car at this same angle any help would be gratly appreciated Thanks Les

I dont't know if the conversion will work. but in regaurds to the angle of the master cyl, My '69 came with a power disk braks stock. The angle is so great that I need to jack up the rear end of the car to bleed the brake lines otherwise, no matter how full the master is, it just keeps sucking air..

Thanks for the info