Okay,

I'm putting a 79 Vette Disc/Disc Master Cylinder (http://www.autozone.com/autozone/catalog/parts/partsProduct.jsp?itemIdentifier=23325_56045_0_&skuDescription=Fenco+Reman+/+Master+Cylinder+%28Brake+System%29&brandName=Fenco+Reman&displayName=Master+Cylinder+%28Brake+System%29&categoryNValue=&sortType=&store=1349&isSearchByPartNumber=&fromWhere=&fromString=&itemId=prod61168&navValue=14400007&filterByKeyWord=&productId=23325&appQuestionText=&searchText=&categoryDisplayName=&parentId=cat30058&questions=[]) into a
'70 A-body because that's going to disc/disc right now once
my 12 bolt rear with 11" Baer brakes gets here. Stock front 11".

I noticed this person put the 1/4" brake line for the rear connected to the front reservoir
with an adj prop valve. Should I use 1/4" for the rear, and does it matter which port I
use if both reservoirs on the Vette master are the exact same size ??

http://media.motortopia.com/files/141/album_/47abd715f2ef7/tn_full_100_5327.jpg