I was removing my brake booster and one of the bolts that goes through the fire wall that holds the booster is loose. I was able to remove the nut by holding it in place with a vice grip. Is there another alternative to replace that bolt other than welding it?

I believe you can get to those bolts from the other side of the firewall. Not positive though. I will look when I get to work. I'll let you know man.

If I remember correctly those bolts are lightly welded to the pedal/steering column support. I can't remember if they have a normal bolt head though. I'd think it would be ok to reuse a loose one as long as it's tight again. It's just hard to get a hand on both sides of the firewall at the same time to work it. :eek:

two of mine are "through bolted" on my 67. had to enlist the help of the wife to R&R the booster. It is a pain but not the end of the world.