|
Lou Merrell Jul 21st, 04, 5:29 PM Hotchkis 1" drop springs: Does the flat end sit in the lower control arm or into the frame. I only want to do this once......... Jawez Jul 21st, 04, 11:01 PM Flat side graemlins/thumbsup.gif goes into the frame. Lou Merrell Jul 22nd, 04, 7:39 AM Great :rolleyes: . Now my spring compressor is in backwards. Well, I better get crankin'; literaly! Thanks Jaws! Lou Merrell Jul 22nd, 04, 3:59 PM Ahh... The importance of taking notes or pics at dis-assembly........ Xtreme70SS396 Jul 22nd, 04, 6:24 PM Note that when you put the spring in, the bottom end of the spring should be between the two little holes in the arm pocket. Don't ask me why, I just know that from someone else here. Got_CID? Jul 22nd, 04, 8:35 PM Originally posted by Xtreme70SS396: Note that when you put the spring in, the bottom end of the spring should be between the two little holes in the arm pocket. Don't ask me why, I just know that from someone else here. I was just going to post that graemlins/thumbsup.gif BTW you'll love the new Hotchkis springs...I have a pair up front on my 70 and they are great! Lou Merrell Jul 22nd, 04, 10:11 PM Thanks guy's! My opinion about why one hole must be left open is so water does'nt sit in the spring pocket on either side of the end of the spring. | ||