driveshaft legnth [Archive] - Chevelle Tech

: driveshaft legnth


cigartoyz
Jan 21st, 10, 4:23 PM
Will a driveshaft from a th350 work with a th400?

job68327
Jan 21st, 10, 4:43 PM
no

elcaminodragster
Jan 21st, 10, 10:06 PM
The th350 has a longer tailshaft something like 4" I think. Someone will correct me with the proper size difference. But the th400 is definatly shorter

bracketchev1221
Jan 21st, 10, 10:09 PM
The tailshaft length is different, yes. But a t-400 is longer overall. So if you are asking can you shorten a t-350 driveshaft to work with a t-400 yes.

job68327
Jan 21st, 10, 10:53 PM
The tailshaft length is different, yes. But a t-400 is longer overall. So if you are asking can you shorten a t-350 driveshaft to work with a t-400 yes.
I suppose the you mean the actual tube itself?I believe the yoke that slips on tailshaft is different and the 400 uses the larger u-joint anyway?

cigartoyz
Jan 22nd, 10, 11:57 PM
Yeah...I wanted to shorten my 350 driveshaft for the th400 I got. So this will work?

Elcoman
Jan 23rd, 10, 12:04 AM
Just need to shorten your shaft and change the yoke for one that fits a T-400.

forever young
Jan 23rd, 10, 9:43 AM
Hey, does anyone know the legnth for a stock setup for my BB, Muncie and rear for my 70SS? I will add about 1" of height to the front end coil springs for the back in the dat look.

Thanks