|
jmhardin May 2nd, 04, 6:46 PM Can someone tell me who sells a kit to box your rear lower arms and add a sway bar. Would like to find a supplier that has the kit complete with the sway. Or is there a better way like getting a compentant welder using his stock metal to fab the job? 70Z15 May 2nd, 04, 6:54 PM John, I think most of the suppliers sell them. Check out OPG. SSJeff May 2nd, 04, 9:20 PM Check out this month's newsletter......has all the info that you need. graemlins/thumbsup.gif Jeff 71350SS May 2nd, 04, 11:34 PM John, When I first got my El,I knew I wanted to upgrade the rear and add a sway bar.At the time the price was 275 for the arms and a factory bar,which was out of my budget. so heres what I did.I bought the factory sway bar new from GMparts direct 65$ shipped.Picked up boxing kit 26$ and sway bar shims/bolt kit 14$ from ground up at the swap meet.Drilled the holes using the dimensions listed here.http://www.chevelles.com/techref/ftecref16.html Took a trip to visit my brother and use his arc welder,cost me a pan of the wifes lasagna.With hardware it cost me about 120$. 72SSAbody May 3rd, 04, 10:15 AM Originally posted by SSJeff: Check out this month's newsletter......has all the info that you need. graemlins/thumbsup.gif Jeff I especially like the the buicks.net write up on the fabbed rect. lower control arms graemlins/thumbsup.gif That's my kind of style! Joe jmhardin May 3rd, 04, 10:23 AM Thanks every one. Now someone link me to the newsletter. For some reason, I cannot locate it. graemlins/clonk.gif djw May 3rd, 04, 3:17 PM John.....go to the members area. The link is posted there. | ||