Stroud nylon trany blanket enough? [Archive] - Chevelle Tech

: Stroud nylon trany blanket enough?


ejrempel
Jan 18th, 10, 11:17 AM
Need a trans shield, and also I guess a flexplate shield. The picture of the Stroud #516 looks good, can't slip because it is bolted to the bellhousing, and I won't have to remove the trans I believe. At $165 bucks, it is cheap enough. The Kevlar blanket on the other hand well, it is expensive. This is going on a 10.90 '75 Camaro with a turbo 400. Any thoughts??

VinceS427bb
Jan 18th, 10, 4:08 PM
Need a trans shield, and also I guess a flexplate shield. The picture of the Stroud #516 looks good, can't slip because it is bolted to the bellhousing, and I won't have to remove the trans I believe. At $165 bucks, it is cheap enough. The Kevlar blanket on the other hand well, it is expensive. This is going on a 10.90 '75 Camaro with a turbo 400. Any thoughts??
:yes:http://www.jegs.com/i/CSR/170/832/10002/-1
these are 1-piece and cover both the bell and length of the tranny.:thumbsup: