I have recently purchased some energy suspension bushings for my 67 chevelle. I have some questions hopefully you guys can answer.

1. Do the bushings go on from the outside in?

2. Do you just push the washers on after you have the bushing in? If so what keeps them on?

3. The directions say if you have boxed lower control arms to use #3087 instead of the #3088. It then states that 1964-67 cars use the #3088 washer. Very confusing.

Any help would be appreciated.

:confused:

I forgot to mention that I have a Moser 12 bolt to install with them. The Moser rearend appears to come with poly ears, but I'm not sure.

The bushings will go in only one way. The control arm holes are larger on one side. The control arm mounts keep the bushings in place and yes they go one after the bushings are in the arms.

Can't help with question 3, although I have done a 66 and a 67 in recent years. I just don't remember.