71MonteSS454
Mar 12th, 01, 10:39 AM
Problem Solved!!!!!!!
[This message has been edited by 71MonteSS454 (edited 03-13-2001).]
[This message has been edited by 71MonteSS454 (edited 03-13-2001).]
|
View Full Version : Control Arm Installation 71MonteSS454 Mar 12th, 01, 10:39 AM Problem Solved!!!!!!! [This message has been edited by 71MonteSS454 (edited 03-13-2001).] Carl Brune Mar 12th, 01, 11:27 AM For the lower front control arms, the hole for the sway bar end link goes towards the front. For the upper fronts there is nothing stopping you from installing them backwards. The correct way is the way which puts the upper ball joint in the more forward position. Make sure you remember to put your upper control arm bumper on before you put the control arms on. 71MonteSS454 Mar 12th, 01, 12:02 PM Thanks Again! [This message has been edited by 71MonteSS454 (edited 03-13-2001).] |