Hello this is my first post so if it is in the wrong area I am sorry, The problem I am having is I replaced my power brake booster and no matter how much I adjust the cylinder screw that connects to the actual break pedal the brake lights do not go off - They are constantly on - and to top that off my gas gauge goes below the empty line and the turn signals on the dash light up when I turn the ignition on??....I am very confused - I restored my chevelle years ago but never encountered anything like this and do not really have any one to contact about this - Thank you very much in advance - Aaron

Sounds like you have a bad ground in your dash somewhere.

Do the brake lights go off when you push the button in all the way by hand? I had a problem with mine where it was screwed in as far as it would go, but it would not push the button in far enough to shut off the lights. I just tweaked my bracket smile.gif