Sorry chevelle guys, but i got a 91 saturn that im replacing rotors, pads, and calipers. There is the caliper support bracket that connects to the spindle to hold the brake pads in. To connect the caliper to this bracket, there are two pins. The top one is just a simple lubed-up pin, (got that one out) but the bottom one is a little different and i think its seized to the bracket. the bracket is a dealer only part and its a Saturday :mad: No torch to heat it up...What do i do to get the pin out??!! :(

Try this forum for saturn info.

http://www.saturnfans.com/

Does the caliper rotate around the pin, so you can flip it up and replace the pads, then flip it back over the rotor and slide the other pin back in? I seem to recall this on toyato and hondas. My wife's car is a 97 SL2, so a little different than yours.

Good Luck. - John