Hi Guys,

I am in need of any/all wiring diagrams for my 67. I am relocating the battery to the trunk and hiding all firewall wires. Just trying to figure out all the changes required.

Please e-mail anything you might have to me at matt.dorram@us.army.mil

Thanks!

Merry Christmas!

Matt

http://cgi.ebay.com/ebaymotors/1967-67-Chevy-Chevelle-11X17-Color-Wiring-Diagram_W0QQcmdZViewItemQQhashZitem53de77648bQQite mZ360214652043QQptZMotorsQ5fManualsQ5fLiterature

Do yourself a favor and buy a 67 diagram, you will not regret it.

The only thing you'll need to do differently is to run a 10 gauge wire protected with a piece of 14 gauge fusible link from the starter (on the battery terminal) up to the junction block on the core support. The fusible link should be at the starter and the red should be at the junction block. This will take place of the secondary lead that went from the battery cable to the junction block. Nothing else should need to be changed assuming that you are running stock harnesses. Good luck with your project!

Donny