|
zefhix Jun 1st, 04, 3:21 PM Hey guys.....our 70 is going to be a 4 wheel-disc car with a modified proportioning valve with adjuster for the rear. Needless to say I'm going to need alot of custom lines to make it all work. Is there a good source for lines that I can purchase them through that any of you have had good luck with? I'm a little nervous about bending and terminating my own lines as I'm worried about leaks. I also need all 4 flexible hoses as well...thanks. johnny69 Jun 1st, 04, 3:32 PM inlinetube.com TronDD Jun 1st, 04, 4:44 PM Got my lines from http://www.rightstuffdetailing.com/ Tim. zefhix Jun 2nd, 04, 7:21 PM Thanks guys...looks like I'll be covered between the two! MAXX2 Jun 3rd, 04, 5:44 PM Originally posted by zefhix: Hey guys.....our 70 is going to be a 4 wheel-disc car with a modified proportioning valve with adjuster for the rear. Needless to say I'm going to need alot of custom lines to make it all work. Is there a good source for lines that I can purchase them through that any of you have had good luck with? I'm a little nervous about bending and terminating my own lines as I'm worried about leaks. I also need all 4 flexible hoses as well...thanks. Another Las Vegas Team Chevelle Member (?????). Maybe all of us locals could hook up some time and discuss our projects. We used Classic Tube stainless for our entire system (Drum Fronts), and just recently had them make the front braided stainless lines for our S-10 front disc conversion. Hope to talk to you soon. Richard L. and Judy C. White/MAXX2 LVMAXX/Team Member #341 898-6396/528-0655 graemlins/thumbsup.gif | ||