Where can one purchase these rollers? The lower center roller is broken. The other two rollers look to be in decent shape. The one side roller has a lot of slop as compared to the other side roller. Is this normal because the same roller on the other window has the same slop? I noticed they have replacement nuts and washers for these as well, but they are made of plastic. Any metal ones available? Is there a special tool to remove these? Thanks, sorry for the multiple questions. :thumbsup: Thanks! :beers:

Have you tried http://www.oldmusclecars.com/ , they are a chevy dealer and might be able to help.
Ray

Have you tried http://www.oldmusclecars.com/ , they are a chevy dealer and might be able to help.
Ray

Checked there, they don't carry any of the window parts

Try here:www.auveco.com
There are independents dealing their stuff. Also any glass shop that deals with C R Laurence.....Look at part number CP987843

Steve O.

Is this what you're looking for?

http://cgi.ebay.com/ebaymotors/68-69-70-71-72-CHEVELLE-QUARTER-WINDOW-ROLLER-ASSEMBLY_W0QQitemZ380128616997QQcmdZViewItemQQptZM otors_Car_Truck_Parts_Accessories?hash=item58816e6 225

Is this what you're looking for?

http://cgi.ebay.com/ebaymotors/68-69-70-71-72-CHEVELLE-QUARTER-WINDOW-ROLLER-ASSEMBLY_W0QQitemZ380128616997QQcmdZViewItemQQptZM otors_Car_Truck_Parts_Accessories?hash=item58816e6 225

Yes it is, Thanks. That's the lower middle reoll assembly. Much appreciated.

Try here:www.auveco.com
There are independents dealing their stuff. Also any glass shop that deals with C R Laurence.....Look at part number CP987843

Steve O.

Thanks Steve, I'll check it out, much appreciated.

Where can one purchase these rollers? The lower center roller is broken. The other two rollers look to be in decent shape. The one side roller has a lot of slop as compared to the other side roller. Is this normal because the same roller on the other window has the same slop? I noticed they have replacement nuts and washers for these as well, but they are made of plastic. Any metal ones available? Is there a special tool to remove these? Thanks, sorry for the multiple questions. :thumbsup: Thanks! :beers:

Bob, I just replaced these on my '70.:D

The center roller I got from True Connections out of Ca. It was a OER reproduction, good quality and exact match.

http://trueconnections.com/

The front roller on mine was extra loose and missing the preload spring. So, I bought these from another place in Ca. called Truck Shop Car Shop

http://www.truckandcarshop.com/

My rollers were rusted on, so I had to make a spanner wrench to remove them.:yes:


I don't usally use these vendors, but I also had problems finding the correct replacement rollers as well. Seems like evey vendor sells rollers advertizing to fit my '70, but none of them were correct untill I found the parts from the above vendors. I didn't understand this as Chevelles (A bodies) are a very common car to restore.

Bob, I just replaced these on my '70.:D

The center roller I got from True Connections out of Ca. It was a OER reproduction, good quality and exact match.

http://trueconnections.com/

The front roller on mine was extra loose and missing the preload spring. So, I bought these from another place in Ca. called Truck Shop Car Shop

http://www.truckandcarshop.com/

My rollers were rusted on, so I had to make a spanner wrench to remove them.:yes:


I don't usally use these vendors, but I also had problems finding the correct replacement rollers as well. Seems like evey vendor sells rollers advertizing to fit my '70, but none of them were correct untill I found the parts from the above vendors. I didn't understand this as Chevelles (A bodies) are a very common car to restore.

Thanks Lance, Great Info!! I'll check into these. :thumbsup: My front rollers have a lot of slop as well. I took everything apart last night (With My home made spanner wrench) :D didn't find any springs either. Thanks again! My next post will be about cleaning and removing minor scratches on original glass! :yes:

didn't find any springs either.

You will notice that there will be a metal tab/ dog leg next to the front roller, this tab is what holds the roller pre-load spring. This pre-load spring is shown in the Body by Fisher Manual.:thumbsup: