where do you guys get'em and how much should I expect to pay?
also is there really a noticable improvement over the 7/8" stocker? (which i don't currently have anyways)
this summer i boxed my rears and now it is time to go shopping :D I plan on using the 1-1/4" for the front.
as always, thanks in advance.

try summitracing.com
you should be looking at about $300 for both front and back sway bars.
Also try looking up hotchkis suspension. They have some good suspension upgrades.

I got mine from BMR Fabrication was $129 i believe. Looks great and works good- but it hangs REAL low under the diff housing... If i were to do it again i would buy a Hotchkis one. I have seen them and they don't hang so low.

Take a look at fo-fydyfo's post. Neat , cheap solution.

Original Parts Group = $79.95.

http://www.opgi.com/VCProdFrame3.asp?group=27612

The 1 1/4" front kit is $104.95. I bought them both and couldn't be happier.

Muscle Factory, $79.95.

Originally posted by browntrout:
Original Parts Group = $79.95.

http://www.opgi.com/VCProdFrame3.asp?group=27612

The 1 1/4" front kit is $104.95. I bought them both and couldn't be happier. Is the front bar hollow, and does it include all of the hardware?

We also want a 1-1/4" rear bar if possible(?).

graemlins/thumbsup.gif

OPGI is currently running a sale on these for $71.95 each. The part numbers are ADDC709 and ADDC939 front and rear respectively. They say they come with full kits.

OPGI is currently running a sale on these for $71.95 each. The part numbers are ADDC709 and ADDC939 front and rear respectively. They say they come with full kits.