I got a tilt tele column from a Caddy and installed it in my 66 with no problems I was wondering if anyone knows of an aftermarket wheel that will work with this type of column. If not I may have to live with the caddy wheel or modify the column somehow. Any help would be appreciated

anyone?

Ididit have some steering wheel adapters, look in the Accessory-section

http://www.ididitinc.com/welcome1.html

Grant makes an adaptor for their wheels. It is not listed but if you call them they will give you the part number. I have it written down somewhere at home. I emailed them a few years ago when I got a T & T column out of an Eldorado. I had to rebuild it due to an attempted car theft. The ign lock cyl, the housing and turn signal switch all needed replaced and were available from the dealer. I would like to see a photo of it installed in your 66, mine is going into a 64.

I am still in the process of installing it. I had to take it back out to install clutch and break pedals. I had to modify the dash opening slightly to get it to fit but is not noticable I am making amount to attach it due to differences in the column. I will post pics on my website when completed

OK you have run into the same install problems I have. I was planning on modifying the column tube rather than the dash to make it fit the smaller opening. The mounting point won't be to hard, I planned on forming a heavy metal strap that will bolt to the factory holes in the cloumn and mount to the dash in the factory location. I have a torch and a welder so anything is possible. smile.gif