I am seriously considering lift bars. Where should i but them? and what brand? do they squeak?
I plan on adding a 7/8 sway bar.. will this bolt up to it?

Brian

I have the Jegs (SSM) lift bars on my chevelle. They work great but I was unable to reuse my rear sway bar. Some have grinded on the sway bar a little and got them to work. I just haven't missed it so far. But if I do I'll do the same to mine.

I ran a stock rear sway bar on my 70 SS396/4 speed using the Southside Machine bars..it was little tight bolting up,and I had to use smaller bolts than stock to bolt the swaybar up,but it was well worth..cured the wicked wheelhop I had graemlins/thumbsup.gif

I used a stock sway-bar on my SSM's also. It was tough getting it in there, but I did it. I didn't really notice any difference in handleing with and w/o the sway-bar though. Some say you don't need it with SSM's

mine dont squeak at all, and im not using a sway bar so i cant comment on that, but i can say the ssm bars increased the handling without it.

I've run SSM liftbars with a sway bar,without a sway bar and couldnt tell any difference between the two. Like Brandon said, the handling improved installing the liftbars alone. The swaybar was a pain in the A$$ to install also,alot easier to remove,and now its standing in the corner of the garage.

you couldn't tell a difference in handleing?

Something in the geometry of the SSM liftbars,reduces body roll, it handles great without the rollbar, I just tried the swaybar hoping to improve 60ft times.