Well the bottom side arm tore out and was dragging, it was horrible! I need to post my photo, is there a way to do it without HTML on the web? Just like an upload on here of some kind..... gotta see it! Need advice yet again tongue.gif

Just reference my photos. :D

http://www.auburnextremeracing.com/drivers/mike/frame/

I added a little brace for the 2nd go-round.

I drove it home with the lower arm partially attached. Kept pulling to the left. graemlins/sad.gif

When i drop in my new lower arm is it going to be a pain in the ass to deal with my coil spring? :eek: Im buying 2" drop spindles as well, I may wait and do it all at once while im down there. Not sure....

Definitely do it all at once, as you have mentioned.

What manufacturer are you using for the 2" dropped spindles?

graemlins/thumbsup.gif graemlins/beers.gif

You know Im not sure, I remember seeing some really good brands in a chevy mag, or hot rodding magazine cant remember which, I remember they are red, I'll dig it out this week, what brands are good and afforadable? Can I drop it with just coil spring spindles? I'm actually wanting to go 2 1/2 - 3" in the front and eventually I'll do the back, probablly 2". I want the front dipped first though since I'll be working in that area, plus you know.... $$$$$ :eek:

I've really confused myself with suspension. Most of the kits like with SuperiorSpindles.com they just look like a bracket, does that type illiminate the need for coil springs? Ah, so confused on what is needed and what is not.

I have torn out both sides(bottom rear)on my 67'Buick GS, after cleaning up the broken peice and welding it back in I got two peices of 3/16" angle iron and bent it to conform to frame/controll arm mount and welded one on eack side, problem corected. This was a common problem on GM cars. Gee Mike, mine kinda pulled to one side too :eek:

haha, yeah pulling to one side..... go figure ;) Still searching for info about coil springs and spindles.... :mad: heh

well everywhere I look for coil springs there around a 1" drop, I have only seen 2" for camaro, I dont want to use drop spindles, mostly do to cost and i have no idea how to do it, springs are easy! Need to find a brand..... :eek:

I like my Edelbrock Eibach springs. Nice drop good ride & handling.