any info about 300 post cars needed . the marker light in the front fenders have no engine # the vin indicates 6 cylinder cowl tag indicates 8 cylinder. all tags have original rivits car has chevelle on rear of front fenders ss holes in rear body pan without crome between tail lights. any info. appreciated

VIN is the engine designator-13127, 13327, 13337, 13369 are the beginning numbers of 6-cylinder 300 series cars. Look here for more info on determining models and motors- http://www.chevellestuff.com/1968/index.htm
6-cylinder cars didn't have the engine size bezels, 300's had Chevelle script on the front fenders, don't know what you mean by SS holes in the rear body pan-the 300's had a Chevrolet red white and blue emblem in the center of the rear cove. Taillights should have the backup lights in them and the rear bumper should not have any holes in it for backup lights.
Welcome to Team Chevelle.
BillL

Hi Harry,welcome. :waving:

Welcome to another 300 post.

As far as the holes in the rear 1/4s there was an emblem that said Chevelle
300

thanks, the ss must have been from a dreamer. I just got the car last week.

welcome, those are cool models :)

Greetings from Arizona
Jay and Bj

Welcome!!

Welcome to the site.

Welcome........2 dr sedans are my favorite.

Welcome Harry...

Welcome to the site Harry.

my vin is 13127b130xxx cowl st 13227 bal 00741

my vin is 13127b130xxx cowl st 13227 bal 00741

I've ran across this phenomena a few times. I just purchased a 67 Chevy II with a V8 cowl tag and 6 cyl VIN. In the past I've had a 67 Camaro and still have a 66 Chevelle with the same issue.

From what I understand they built the cars (body/interior) including cowl tag first then install the ordered engine with VIN to match. I don't worry as long as the rivets are original & VIN matches title............

Welcome to the site.