I wanted to lower my car an 1 inch or more And that wanted to get new tires and wheels. Some of the research recommend to get the tires and wheels first then lower the car, so I did. My concern is a 2 inch drop could be too much, as my car is somewhat a daily driver and I didn't want to worry about every little bump that I would be bottoming out or scraping something. so not really knowing I decided to purchase the QA1 system, knowing that they height adjustable. Now that I installed the QA1 system I noticed the upper control arm is too high.

I haven't driven the car yet, as after I did this I decided to pull the engine and have it rebuild. So my question was this a mistake after, I should have just used the 2 inch drop spindles.