Anyone hear anything about Original parts group 2" and 3" drop springs?

I have a set of each, 2 & 3 inchers. I put the 2" set on my El Camino and they dropped the rear plenty. Got them for a song on Ebay. They were brand new. There's a couple good shots of my El Camino in this thread. (http://www.chevelles.com/forum/ultimatebb.php?ubb=get_topic;f=24;t=001124)

I have the OPG 2" drop springs on the front, rear springs are original and due to be replaced soon, they are sagging quite a bit.
http://www.chevelles.com/showroom/17Again/RobsPatriotBu1.jpg
http://www.chevelles.com/showroom/17Again/RobsPatriotBu3.jpg

i have 2 in drop springs in the front

I want to go w/ a 17inch wheel package. Now the people that have the 2inch drop , do you wish you went with a 3inch or are you happy with the way the car sits and the groud clearence it has? Thanks

I've got 2" drop springs in the front, and 3" drop springs in the rear. Very happy with both. Pictures on my homepage.

Originally posted by NicksGarage:
I want to go w/ a 17inch wheel package. Now the people that have the 2inch drop , do you wish you went with a 3inch or are you happy with the way the car sits and the groud clearence it has? Thanks I have 235/60/15's up front. with my small block and full length Dyno-max headers I really have to watch for speed bumps etc. I rally mashed the bottom tube on the drivers side at a gas station. The tanker fill plugs were sticking up about 3" and I slammed the tube. If I don't take speed bumps at a 45* angle I scrape the collector.
I like the look so I put up with it. These drop springs really tighten the front suspension also. If I nail the throttle the nose of my car doesn't rise as high as it did before I installed these springs.
Rob

my car with the 2 in drop springs is the lowest i would go. i have a hard time just jacking up my car. i either have to lift it a bit and push or do one side at a time at the a arms

I am running 3" springs front & rear w/ Global suspension. I have 10" rallys in rear w/ 275/50/15's & 8" rallys in front w/ 225/60/15's. It looks bitchin in drives great. I have a BB w/ Hedman shorty headers. JOHN :D

Got a picture of your car john? Sounds nice!!

What's the spring rate on these?

Joe

I have the 2" drop springs from OPG and 17" wheels. The rear springs are stock and also due for replacement. Just need to find time to work on it.

http://members.cox.net/jeusebio/DSC00230.JPG