The title explains it. I can't find a number for the longer bolts. Do you have any suggestions. If you do, my parts counterman will love you because he is sick of me telling him that he is wrong. :D

Thanks

R.J.

RJ,
I seem to remember someone saying they found theirs in the "help!" section of the parts store.

graemlins/clonk.gif graemlins/clonk.gif

If you can't find them, then the 'yards around here have them and I can send you a set. Just let me know!

graemlins/beers.gif

Joe

Thanks Joe.

The 'help' section ones and the regular parts book ones are for the regular width GM metric calipers. These should be maybe .200" longer. I am not positive on the length but something like that.

I'll let you know.

R.J.

Originally posted by airrj:
Thanks Joe.

The 'help' section ones and the regular parts book ones are for the regular width GM metric calipers. These should be maybe .200" longer. I am not positive on the length but something like that.

I'll let you know.

R.J. I'll be picking a set up from the 'yard this weekend just in case you can't find them.

Joe

If you get a set are you going to ship them Fed Ex? :D graemlins/clonk.gif :D

RJ
Try Raybestos number H5500 or brakeware H5004

Originally posted by airrj:
If you get a set are you going to ship them Fed Ex? :D graemlins/clonk.gif :D Low blow!!! :D

Joe

This may help,
in my old EIS hand book #ES901 they show a few. My guess H5004 GM length 4 3/8 3/8 socket 7/16 x 20 thread
H5011 GM (rear) length 4 9/16" 3/8 socket 7/16 x 20 thread
No 5500 (old catalog)
also H5002 GM length 4 1/8 3/8 socket 7/16x20 thread

Team member #74

Thanks Guys.

I have a H5004 and it is not long enough. These are the calipers that fit the 1.250" thick rotors not the stock 1.100" rotors. I will have to try the H5011.