I'm searching for a two speed wiper motor for a 64 chevelle, I seem to have misplaces mine. Anyone have one laying around?

Is it similar to a '65?

I may have a wiper motor from a 66 not sure if it is 2 spd

I assume it's the same as the 65. Since I'm missing my motor I'm going off what a 1 speed motor looks like, the 1 spd motor nose cone is too big for the hole in the mounting plate. I did notice today that there are some cars that don't have the mounting plate, does anyone know for sure which motor is used when the mounting plate is present?

Thanks,

Chris

Try asking a parts store for a wiper motor for your car. I ordered a rebuild motor with the correct configuration at a Bumper to Bumper parts store.

I assume it's the same as the 65. Since I'm missing my motor I'm going off what a 1 speed motor looks like, the 1 spd motor nose cone is too big for the hole in the mounting plate. I did notice today that there are some cars that don't have the mounting plate, does anyone know for sure which motor is used when the mounting plate is present?

Thanks,

Chris
:noway:
---
1965 Malibu SS single speed w/w motor withOUT squirters:

http://i215.photobucket.com/albums/cc309/MalibuSeaS/Malibu%20SS/SingleSpeedWiper01.jpg

1965 Malibu SS dual speed w/w motor with squirters:

http://i215.photobucket.com/albums/cc309/MalibuSeaS/Malibu%20SS/DualSpeedWiper01.jpg

Hope it helps ;)

Also, the mounting plate is used on the 2-speed motors only. The one-speed motors mount directly to the firewall.

To properly install a 2-speed motor there should also be a spacer between the firewall and the master cylinder.

That helps a ton, I have the round 2spd motor that I just picked up from a fellow Chevelle guy that's local and it looks the same. SO, I think I'm set, thanks a ton for the pictures!!!