Anyone have a 68 with a 307 and power steering. I do not have air. Would like to know the pulley configuration. Pictures would be a great help.

The alternator runs off of the single groove pullet bolted to the balancer. The power steering runs off of a pulley that fits inside the single gooove crank pulley.

I just pulled that engine out of my 68 chevelle. If you need any or all of the the brackets or pulleys let me know. bpursley@esc14.net

Purs; you have mail

I have a 68 with a 307 in it. I have double groove pullies on the water pump and the crank. The outtermost groove I use for the alternator and the innermost I use for the power steering. Let me know if you would like me to post a picture.

pop_tart_68; please do post a picture of the setup if you do not mind.

sorry for not cleaning up first, I just ran out and took these.

http://www.angelfire.com/pop2/pop0tart/belts1.jpg

http://www.angelfire.com/pop2/pop0tart/belts2.jpg

Hope this helps