yardcar
Jul 26th, 04, 3:52 PM
Is a control arm shaft with 5499 F and "Wheel Side" on it an offset shaft. I compared it to a K5250 and can't really see much difference.
thanks,
bill g
thanks,
bill g
|
DG Jul 26th, 04, 6:40 PM Look at the area just after the end towards the flat area. You should see an offset to the centerline. yardcar Jul 27th, 04, 9:00 AM DG, Thanks for reply. It looks offset to me but I wasn't sure if maybe they all were a little and the K5250's were a little more. I posted a couple of pics in the Offset album at http://community.webshots.com/user/ipedal bill g yardcar Jul 27th, 04, 9:27 PM Ok, I give on Webshots. They haven't updated their pic page all day. So I put a couple of pics in the Temp showroom http://www.chevelles.com/showroom/tempoffset2.JPG http://www.chevelles.com/showroom/tempoffset1.JPG So is this an offset shaft? thanks, bill g yardcar Jul 27th, 04, 9:35 PM One more http://www.chevelles.com/showroom/tempoffset.JPG bill g | ||