Im looking for the best price on a front end rebuild kit. American made parts preferred. Who has the best prices on an original style kit? thanks for the assistance.

Make friends with your local auto parts counter guy...tell him you're planning a complete front end rebuild, you want good quality parts, and ask him for his best prices.
And as a plus, you've got a face to go back to if something isn't quite right later on. ;)
My local Mom and Pops store almost ALWAYS has better pricing than the large chain stores. And the expertise is free. :cool:

Rock auto: you can get all Moog for about $300-$400........

Hello,

We have a great all-inclusive Original Performance Front End Kit for $419 with FREE SHIPPING! It includes the following:

https://www.p-s-t.com/pc-226-28-chevrolet-chevelle-malibu-el-camino-1964-88.aspx

Most Super Kits Contain:
* 2 Upper Ball Joints
* 2 Lower Ball Joints
* 2 Strut Rod Bushings (if required)
* 2 Outer Tie Rod Ends
* 2 Stabilizer Links
* 2 Inner Tie Rod Ends
* 1 Idler Arm
* 4 Upper Inner Control Arm Bushings
* 2 Lower Inner Control Arm Bushings
* 2 Sway Bar Bushings (for most models)
* Control Arm Bumpers (for most models)
* 2 Tie Rod Adjusting Sleeves
* 2 Upper Control Arm Shafts

I haven't looked into the bushings, but the ball joints, tie rods, etc are all Federal Mogul (Moog) parts!

Best of luck with your front end rebuild, and please give us a call if you have any questions.

Hello,

We have a great all-inclusive Original Performance Front End Kit for $419 with FREE SHIPPING! It includes the following:

https://www.p-s-t.com/pc-226-28-chevrolet-chevelle-malibu-el-camino-1964-88.aspx

Most Super Kits Contain:
* 2 Upper Ball Joints
* 2 Lower Ball Joints
* 2 Strut Rod Bushings (if required)
* 2 Outer Tie Rod Ends
* 2 Stabilizer Links
* 2 Inner Tie Rod Ends
* 1 Idler Arm
* 4 Upper Inner Control Arm Bushings
* 2 Lower Inner Control Arm Bushings
* 2 Sway Bar Bushings (for most models)
* Control Arm Bumpers (for most models)
* 2 Tie Rod Adjusting Sleeves
* 2 Upper Control Arm Shafts

I haven't looked into the bushings, but the ball joints, tie rods, etc are all Federal Mogul (Moog) parts!

Best of luck with your front end rebuild, and please give us a call if you have any questions.

Thanks for the reply! You guys should advertise the Moog(MADE IN USA) for that kit. I would have bought it. Little late now...

Could a novice do this? I have done front brakes and bearings before. Is there specialty tools involved?

So is MOOG now federal mogul? Just asking, my local Napa guy says they don't carry MOOG anymore, but they carry ferderal mogul, same quality?

Moog is a Federal Mogul company. The Moog Problem Solver line IS THE A TOP OF THE LINE REPLACEMENT PART AND INPRINTED ON THEIR BALL JOINTS,ETC Bob Rizzi~~~

Moog has always been owned by Federal-Mogul.

Moog Automotive Products was a Cooper Industries Company and was purchased by Federal Mogul on August 18, 1998.This purchase became an automotive "powerhouse" with such name brands as Wagner,BCA, Champion and Anco all on the Federal Mogul line card. Bob Rizzi~~

Unless the Napa store is buying from an outside source, Napa is DANA. The counter man must not have known that, standing behind the counter every partsman should know what he is selling.

Tom,that is a great line "know what you are selling" and how about this one "know what you are buying"

Moog Automotive Products was a Cooper Industries Company and was purchased by Federal Mogul on August 18, 1998.This purchase became an automotive "powerhouse" with such name brands as Wagner,BCA, Champion and Anco all on the Federal Mogul line card. Bob Rizzi~~
Thanks guys.. I bought most of my stuff from SC&C, I am just short on inner & outer tie rods.