Thinking about getting the Steering Linkage Kit from PST for my 67. It comes with 1 centerlink, 1 idler arm, 2 inner and 2 outer tie rod ends, and 2 adjusting sleeves. If I change all that, doesn't it make it a moot point whether my original was 13/16 or 7/8?

Just for my own FYI, where do you measure to determine whether you have a 13/16 or 7/8?

It would seem so, especially if there is one and only one Pitman arm and only one style of steering arms for your year of car. That is the question. The fit of the center link stud into the Pitman arm and the fit of the tie rod ends in the steering arms needs to be checked.

There is only ONE CENTER LINK FOR A 1967 CHEVELLE (MEASUREMENTS ARE DIA. OF EARLIER LINK) BOB RIZZI