i bought the car with no dash or wiring harness except the one for the tail lights, i put in a dash and front harness, and have them hooked together, but i don't know where to go from here, i diagram would help alot

What part of the harness do you need help with?

i need one for power distibution, the car had nothing but the tail light harness, and i'm using a used harness, i just need to know what wires go to the seloniod and how the fuse box gets power

I have one at my dads house that I bought for my 66....I'll probably be over there tomorrow and will take a look at where I got it from...It was nice all color coded paper and laminated

The fuse box gets power from the junction block on the core support near the battery. The solenoid for the starter gets two wires. it depends if you're running points or H.E.I. For points you need the purple wire i believe #10 size to the s terminal of the solenoid and the yellow #16 wire to the r terminal of the solenoid.

You have a PM.