Hey guys its that time I'm gonna rebuild the front end and replace rear bushings in my 71 conv.

Is their any site sponsers that sell a Moog/Dana Spicer bushing replacement KIT?

Here's my rebuild plan, replace all suspension bushings with rubber, tie rods inner/outer, center link, idler arm, ball joints, Bilstein shocks, maybe Hotchkis springs although I'm thinking those won't be low enough.

This car is just a family cruiser you guys think I should do anything different?


Jeff

Jeff, 2 great companies.If you go with Moog make sure it is in a 'MOOG BOX" The ball joints have updated h.d. rubber boots as well as the tie rod ends/ the center link,ball joints,idler arm,tie rod ends and sleeves are "MADE IN THE USA" also the new products are stamped "Moog" Good Luck, Bob Rizzi

Hey guys its that time I'm gonna rebuild the front end and replace rear bushings in my 71 conv.

Is their any site sponsers that sell a Moog/Dana Spicer bushing replacement KIT?

Here's my rebuild plan, replace all suspension bushings with rubber, tie rods inner/outer, center link, idler arm, ball joints, Bilstein shocks, maybe Hotchkis springs although I'm thinking those won't be low enough.

This car is just a family cruiser you guys think I should do anything different?


Jeff

Our Front End Kits for the Chevelle include all Moog/Federal Mogul idler arms, tie rod ends, and ball joints! I'm not sure about the bushings, I'll have to check.

All of our Super Front End Kits are on sale for $100 off for the month of October (the sale ends tomorrow). Hope this helps!