|
: whats needed for tall spindle steve carter Mar 22nd, 04, 1:22 PM could someone please help with some answers, please don't answer to check the archives because I've been reading and looking for days now. so here's my question. what all parts are needed for the tall spindle brakes ( I already have the spindles,calipers, backing plates etc...) besides the tubeular a-arms, 0.70 milled off lower balljoint, what about tie rod ends, THANKS for any help graemlins/waving.gif Philip Mar 22nd, 04, 1:58 PM Yes you need outer ends. You didn't post the year of your car. If the adjusting sleeve has the small threads use an outer end from a G body, if it is the large diameter thread use the one from an F body. You also need an upper ball joint from an F or G body. It should bolt right on to your upper arm. canxlr8 Mar 22nd, 04, 2:46 PM Steve, This is what you need. 68-70 A-body inner tie rod end: ES681N 78-88 G-body outer tie rod end: ES2033RL sleeve: ES2032S The tie rod sleeve is the same for the 68-70 A-body and 78-88 G-body. Here is the thead (http://www.chevelles.com/forum/ultimatebb.php?ubb=get_topic;f=7;t=007295;p=1) where this info came from(page 2). Are you doing the steering box change also? Good luck graemlins/thumbsup.gif steve carter Mar 22nd, 04, 3:12 PM It's a 67 sorry about that. Is there a need to change the steering box? I have a disc brake set that will bolt right on. since I'm wanting everything just wright, I was rolling the thought of tall spindles in my head. I like the idea of the handling ,bigger rotors etc.... just tring to see what all is involed and what all parts are needed. I've read alot in the archives but can't seem to find a complete list of parts .once again Thanks for the help smile.gif Peter F. Mar 22nd, 04, 9:17 PM Steve; I have a word document with every part listed and the part numbers for the important ones. I'm just missing part numbers for some of the little things. Get me an e-mail and I'll send it to you. Peter steve carter Mar 22nd, 04, 11:43 PM chevelleman2003@y graemlins/beers.gif ahoo.com steve carter Mar 22nd, 04, 11:45 PM sorry don't how that happened e-mail address is chevelleman2003@yahoo.com Peter F. Mar 23rd, 04, 12:41 AM I just sent it. Peter tracycats Mar 23rd, 04, 8:12 PM I bought a set of 12" spindles from this guy http://www.scarebird.com/4436.html on ebay for $85.00. He has the spindles machined so you can use stock Chevelle pieces. I don't see any on his website but contact him for more info. I've had mine for a while now and they are great. He even sent me the spindles with the larger inner bearing. Good luck, Marc graemlins/hurray.gif | ||