I am putting the dash back together and I am having trouble with the heater cables to the heater switch. I think I have them correct? I remember labeling the cables when I removed them from the heater box. For some odd reason the middle cable seams to be really long. But the other 2 line up correctly. Looking at the heater box the cable to the left is for the floor heater/defroster and the cable to the right I think is for the cold hot and the one in the middle is for on/off? Does any one have any pictures that would help me out?

Thanks Jason

I guess it pays to take pictures. I think the middle cable is suposed to wrap around the defroster duct? Is this correct? It is hard to tell from my pictures.

A/C car or not?

Sorry not an ac car.

Jason

Sorry Jason but mine has a/c, therefore I think the cables are different. Maybe somebody else will chime in and help. Good luck.

Email sent with .jpg attachment of cable routing. Hope it helps. :thumbsup:

Dale M-
Could you send me the same pic of the heater cables? Ours too is not an a/c car. And we too are having difficulties making the cables work. Thanks. sph@iowatelecom.net

Dale M-
Could you send me the same pic of the heater cables? Ours too is not an a/c car. And we too are having difficulties making the cables work. Thanks. sph@iowatelecom.net

On its way...

dale may I have that too. thanks

Dale,
Thank you very much. The diagram helped me out and I figured out my problem. In view C I was missing #6 that clip that centers the cable on the heater box. My 2nd problem was the long cable had a 90 degree bend and I couldn't get it to line up to the lever on the heater control. I think what happened was the cable was rusted and someone before me tried to move the lever and bent the cbale. Once I staightend the cable everything went together and worked great.

The picture Dale sent me!

Jason

http://i35.photobucket.com/albums/d189/jasonchale/1b21.jpg