I would like to know what i have to do to put spindles out of a 73 malibu in a 64-72 a body.I know the spindles are taller but I would like to use them anyways,I did a search and didn't come up with much.Thanks in advance.....

,john

The spindles will bolt up, BUT to do it right you should use the 73 Upper ball joints and have the 73 lower ball joint base machined down to 2.012" to fit both the lower control arm and the 73 spindle.

This is your basic 11" tall spindle swap.

http://hometown.aol.com/smartasreality/page12.html