: Snipe bid on ebay
Kevin R Oct 20th, 09, 11:32 PM And look what I got. A new set of L2308 427 pistons:D
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190341719979&ssPageName=ADME:B:BCA:MOTORS:1123
These will go great in the .060 over 2 bolt block I have sitting in the garage. Now I need to find a steel 396 crank.:D
FRYNTYR Oct 20th, 09, 11:41 PM Roller cam written alll over this motor,,,,,,,,,,,,,,,,,,, :D
Brettd85 Oct 20th, 09, 11:42 PM Thats great, sounds like its going to be a pretty hot engine! This is going to be a budget build right? How much you think you can do it for? Your going to sell it or find a car for it after its done?
lesscubes Oct 20th, 09, 11:44 PM All these rat motors... I feel more and more inadequate by the day.
Brettd85 Oct 20th, 09, 11:56 PM All these rat motors... I feel more and more inadequate by the day.
Sooo, get one! :D
Kevin R Oct 20th, 09, 11:57 PM Thats great, sounds like its going to be a pretty hot engine! This is going to be a budget build right? How much you think you can do it for? Your going to sell it or find a car for it after its done?
Yes this is a budget motor meaning that all parts will be either used or killer deals like these pistons. I will hang onto the motor and find a car to install it it to do some racing with. I just need to wait for a year or so until work picks back up. Right now I will just buy parts when I have extra money.
Kevin R Oct 20th, 09, 11:58 PM Roller cam written alll over this motor,,,,,,,,,,,,,,,,,,, :D
Yep solid roller, iron heads running on race gas only :D
kettbo Oct 21st, 09, 2:23 AM WOW! Serious good deal!!!!!!
gotago Oct 21st, 09, 9:21 AM All these rat motors... I feel more and more inadequate by the day.
Just bide your time, Kevin will change his mind soon and you can buy his parts:D I got dibs on the roller cam:waving:
65lkey Oct 21st, 09, 11:00 AM Yep solid roller, iron heads running on race gas only :D
Might want to be careful. I didn't use my trw's because of the problems with fitting a big cam in them. I'm sure you find a fat and lazy cam that would fit, or just for insurance have them flycut. JMHO
FRYNTYR Oct 21st, 09, 11:14 AM Might want to be careful. I didn't use my trw's because of the problems with fitting a big cam in them. I'm sure you find a fat and lazy cam that would fit, or just for insurance have them flycut. JMHO
Those big pistons will take much more cam than those 11-1's you had. I checked the 12 1/2 -1 TRW's I have in a 427 on the stand against the .680 lifts solid roller out of Jim's motor and had well over .125 clearance.
Kevin R Oct 21st, 09, 6:09 PM Just bide your time, Kevin will change his mind soon and you can buy his parts:D I got dibs on the roller cam:waving:
Your right Mark. You just never know what direction I will go next.
I wasnt really prepared to buy pistons but I came across these and just had to put a bid on them. :yes:
Racing Oct 21st, 09, 8:01 PM Nice score!! :thumbsup:
| |