Anybody got a correct pic of these.

Yes
Here is for 69-72 BB

http://i193.photobucket.com/albums/z238/1badss396/AC%20Brackets/th_af5d.jpg
(http://s193.photobucket.com/albums/z238/1badss396/AC%20Brackets/?action=view&current=af5d.jpg)

And here is a set for small block
http://i193.photobucket.com/albums/z238/1badss396/AC%20Brackets/th_cc7b.jpg
(http://s193.photobucket.com/albums/z238/1badss396/AC%20Brackets/?action=view&current=cc7b.jpg)

Brad those must be early design. The set I have I took off a 69 myself and they resemble the BB. My main concern was the rear compressor bracket.

John I dont know about any early design, the ones that I posted for 69 are the top picture and also used for 70. I think they changed design in 71 with a different bracket that goes over the valve cover and does not have a hole in it.

John post a picture of the ones that you have now??

Here they are. As you can see how they resemble the BB. Just need the correct rear compressor.

The website: www.oldmusclecars.com ( Modern Chevrolet ) has diagrams of the 69-70 ( 1st. design ) A/C brackets. Its on page 9-10 in the heater-A/C-wipers section. The curved bracket in your photo looks like a p/s pump support bracket ( pt. # 3959558 ). You can put that part # in the search box and it will give you a photo of it.

Erich you are right about PS bracket it must have been mixed in. The other info I need was found there also. Thanx. I had the bracket.