All,
I have a 72 Chevelle SS, new Hotchkis suspension system, new polyeurathane bushings on front, and all front-end pieces have been replaced. The rear has new springs and shocks, but I have not replaced the rear bushings on upper and lower control arms.
Can worn bushings cause a side to sag an inch more than the other? The car sagged before I put the new springs and shocks as well. Any help would be appreciated.
Thanks

Have you checked the body support bushings? If they are collapsed on 1 side, your car will lean.

Thanks!
I'll check that. I should have thought of that before. What is better, rubber or eurathane body bushings?

Rubber will insulate against vibration more, urethane will give you more "feel" It depends on how you use the car.

Jeff