|
Dave Nov 16th, 03, 7:52 PM Was reading in the archives, and found an article that states you can modify drum spindles by removing 3/4 off the spindle. Is this correct, and if so does anybody have a picture or diagram? Want to take mine to the machine shop and would like a little more info. TIA FO_FDYFO Nov 17th, 03, 8:24 AM it is .590 to .600 inches to be removed. not .75 rick Nov 17th, 03, 9:53 AM A picture is available here: http://ourworld.compuserve.com/homepages/David_Pozzi/brakes.htm#Converting_Drums_to_Discs The oic is down the page & it may take a while to load. The camaro spindles are the same as chevelle of that era. | ||