freshayr
Oct 1st, 09, 1:57 PM
Hey guys,
I have a 1991 GMC Kodiak truck with a 427 motor. I have a fuel problem. I have fuel to the carb but it has , and I don't know what you call these, electric controlled venturis. the are 2 different ones each with 2 electrical wire comeing out. I need to find a wiring diagram as to what controls the current to those venturis. If I dump gas in the carb, the truck with start right up and run until that gas is gone. thes carb is not pumping. I was told one lead should be hot and the other is a pulsing ground when the motor turns. Any help?
I have a 1991 GMC Kodiak truck with a 427 motor. I have a fuel problem. I have fuel to the carb but it has , and I don't know what you call these, electric controlled venturis. the are 2 different ones each with 2 electrical wire comeing out. I need to find a wiring diagram as to what controls the current to those venturis. If I dump gas in the carb, the truck with start right up and run until that gas is gone. thes carb is not pumping. I was told one lead should be hot and the other is a pulsing ground when the motor turns. Any help?