Put disk brake kit on 67 chevelle. Bleeding back DRUMS, the front were leaking. Changed washers and leak stoped. Finished back went to front would not bleed. Getting fluid through the hose to the banjo nut. Did the valve close off when the leak started while bleeding the back? If so how do I re-set the valve? Or is something else wrong.
Bill

Bill,
You crack open the bleeder and nothing comes out? No air or fluid? On both sides?
There is nothing to reset.
Make sure you didn't drain the MC with the leak.
John

Joun,
Master is full. No air or fluid. I thought that with drums and disk set up when one end has a leak during braking, that the valve will close off to the leak so you will have brakes at one end.
Bill