I'm talking about the one that bolts to the frame just below the master cylinder and has a wire plug that goes to the brake warning light on the dash. I have the block itself, I need a photo of it installed on the frame.

To make the disc brake conversion on my wagon I need to install a '67 stock sytle junction block and I think I'll have to do some modifications to the mounting location on the frame to mount the block. I just don't know for sure since I'm not sure how they mount on a '67.

It would also be helpful to see a scan of the page out of the '67 assembly manual which shows how the block and lines are installed in this location.

TIA

ttt

Surely someone can help me out here.

info is in the service manual available on paper or CD

Yes, but I'm working on a '65 trying to make use of '67 brake lines to accommodate front disc brakes. Seems silly to buy a whole manual for one questions.

Moot point now anyhow since I've planned to ditch the '67 brake line idea for another route that will fit more readily in my application (65 with a big block). I plan to use Z16-style brake lines which will bolt right on to my frame and '65 distribution block.

Check Mike Crowns Fact CD I think a pic is in there don't have mine handy HTH