Anybody know a source for a set of original bolts, nuts and washers in the correct sizes?

I'm using grade 8 X 1/2" bolts but I'm having some probs with the fit.

Anybody know a source for a set of original bolts, nuts and washers in the correct sizes?

I'm using grade 8 X 1/2" bolts but I'm having some probs with the fit.

3.5 x 1/2 grade 8 should be right. Not positive on the length, I can check, I just replaced the SSM liftbars with stock control arms, still have the old hardware. Only difference with original is they're grade 5 and the shoulder is slightly smaller than 1/2", probably so they don't seize up with rust inside the bushing sleeve. The threads and shoulder next to the head are 1/2". Use anti-seize grease with regular bolts.

If you want original style there is a guy on Ebay, location is Romeo, MI, I think that has them now and then.

http://cgi.ebay.com/ebaymotors/64-thru-70-Chevelle-CONTROL-ARMS-LOWER-BOLT-PARTS-KIT_W0QQcmdZViewItemQQ_trksidZp4634Q2ec0Q2em14Q2el 1262QQhashZitem518c6f8b42QQitemZ350248471362QQptZM otorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Herb you could give them a call, title says 64-72 but description says 70-72....I'm not sure what the differences are if any.....Good Luck

http://www.eastcoastbolts.net/homepage.html

:thumbsup:

Thanks.

Anyone else know of a source?

Gardner Wescott has a good selection of OEM fasteners.

AMK Products has a wealth of original style bolts, nuts, etc.

http://www.amkproducts.com/

I got a set of correct exact to NOS control arm bolts for my 66 Convertible from inlinetube.

http://www.inlinetube.com/

I got mine from Hinshaws.

Hello
I just noticed that you are looking for new rear lower control arm bolts. And I just wanted to through this out there for you that UMI Performance also offers a rear control arm bolt upgrade kit (part # 4001). If you have any other questions feel free to ask and I will be more than glad to help.
Thanks
Brad :D

I have a good number of used bolts in great condition.