I didn't get much response in another section so i decided to post in the high traffic area. To start, I stripped all of the brake lines out of my 72', which was mostly hacked toghether the last time around. Now I am redoing the car again and want to do it right. All I have is the original power drum prop valve that mounts off the frame and a Wilwood adjustable prop valve to adjust the rear brakes.

What I am going to:
4-wheel Power disc brakes

What I want:
Complete line kit from master to the calpier hoses.
I want the prop valve that mounts off of the master cylinder (not on the frame).
Needs to be the convertible front to rear line since I boxed the frame.
Would like a correct bolt in prop valve for 4-wheel power discs, but will use my Wilwood prop valve if need be.

I need not want/ need the factory correct look, I want function over form. I would rather not piece this toghether, but where is the best place to go for every piece I need without breaking the bank?

Thanks

http://inlinetube.com/

Bend your own. Now'd be a great time to buy the bending/flaring tools. The tubing itself is fairly inexpensive.

i got mine from inline. fast delivery and super staff to work with. very helpful folks