Been looking @ pictures with Boxed lower control arms & a rear sway bar, and it just looks like the SSM Lift bar holes are further apart then the stock holes and are angled differently.

I am looking to put a stock 7/8" Bar in the back and just need to make sure i get the right bar.

THANKS!!!

Anybody know??

im not running a sway bar with my ssm bars so i couldnt tell you for sure. but doing a search in this forum and the performance forum i came up with a couple of posts with some info.

check these links out, especially the first one.

Southside lift bar-sway bar question (http://www.chevelles.com/cgi-bin/forum/ultimatebb.cgi?ubb=get_topic;f=4;t=016491)

ssm lift bars VS nohops (http://www.chevelles.com/cgi-bin/forum/ultimatebb.cgi?ubb=get_topic;f=4;t=014416)

Cool, thanks for shooting me those, i found my answer.

No you use a stock sway bar...i have the ssm's and a stock sway.
dane

I have SSM bars and a stock sway bar. I think the holes are a bit forward of the stock location. I had to grind a bit on the sway bar to get it to bolt up.

I just added a swaybar to my SSM liftbars about a month ago,hoping to add a little consistency to my 60ft.times. It was a bolt in deal for me,no grinding at all. I got my swaybar new thru gmpartsdirect.com