Hello all, I need to find a new plastic bushing that mounts on the throttle pedal arm that the cable goes through. Mine broke and I have not been able to find a replacement yet.

OR, if anybody has used something else, I'd be open to other ideas as well as long as they don't leave the cable sloppy in the pedal.

Any help would be greatly appreciated!

One of those little barrel thingys with a set screw that is used on a manual choke wire works OK.
Maybe even a part off of a bicycle hand brake cable would also.

That's tough one,,,I never thought about where to get another one of those :confused:
Use to be as a kid growing up, when my pop needed at part,,we'd just walk thru the field up to Tommy's junkyard and get one (the good ol'd days)

I think this is what you need
http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=AZC-88&Category_Code=ACCELERATOR

Or go to your nearest GM dealer and order part #403929. I got one from GU and it was in the GM bag with that # on it. Quicker than GU and no shipping.