Ok guys bare with me here this is the first of many questions. I have a 64 wagon, the front end is shot and i am rebuilding it along with the rear end. I bought some hotchkis springs front and rear, a hotchkis sway bar, polyurethane bushings for hte control arms, edelbrock ias shocks front and rear and all other components are moog. The car has 2 inch drop spindles. and a 1 inch swaybar on back. ok first question is does this sound like a good setup for my wagon that will help it perform, drive and ride better. Second, I am confused about the cenerlink whta size do I have 7/8 or 13/16 and since I am buying a new one should I Buy the bigger one regardless, is there any benefit to it. I would greatly appreciate any help thanks.